Threalock 6271 anaerobic threadlocker is a green coloured
coded medium to high strength and medium viscosity for
general purpose fasteners . Excellent chemical and fuel resistance . It helps to
prevent loosening of bolts , screw and studs up to 1 '' diameter from vibration .
Heat may be required to disassemble the part . Ideal application for valve sets ,
fasteners on vibrating machines , automotive suspension bolts , refrigeration parts ,
transmission and engine block studs .
1 . Surfaces must be cleaned and dry
2. Shake the bottle before use .
3. Apply sufficient Thread - lok to both surfaces .
4. Assemble components and removes excess Thread - lok .
5. Allow assembly to cure in a few minutes and full strength after 24 hours .
( It depends on product grade and type of surface )
Used with adequate ventilation . May cause skin and eye irritation . In case of
skin contact , wipe off with cloth and flush with water . In case of eye contact
immediately flush with water and call physician .