Directions for use:
1. Surfaces must be clean, dry and oil free.
2. Pierce seal at the end of the metal tube with reverse end of cap.
3. Screw on nozzle and cut to desired bead size.
4. Apply even bead (1/16" ~ 1/8") around perimeter of surface.
5. Assemble part once silicone skinned (~ 15 minutes).
6. Remove excess silicone. Do not squeeze silicone by over-tighten bolt.
7. Clean nozzle, replace cap after use.
1 x 100g HARDEX Hi-Temp Grey RTV Silicone Gasket Maker (RS-625)